Under the functions of rotary centrifugal force, friction and annular gas buoyancy, the powdered material mixed and glued with appropriate atomized slurry that sprayed in to complete the process of granulating (pelleting), shaping(spheronizing), coating etc.. This centrifugal coater not only has the functions of granulating (pelleting) and coating, but also combined with spinning granulator, extruding granulator and swing granulator to complete the shaping (spheronizing) of pellets by replacing the gear turntable. And its granulating, spheronizing and coating processes are shown below.
Centrifugal Granulating (Pelleting) Coater combines rotary fluidized bed technology with tangential spray technology, with functions of making core granule, granulating (pelleting), amplification, spheronizing, coating and so on. It is one of the necessary equipment in the production process of solid pharmaceuticals.
The equipment is made of high-quality austenitic stainless steel, the inner and outer surfaces are highly polished, all corners are arc transition, no dead corner, no residue, with well-shaped appearance. Adopts PLC control, which can set parameters as user required to granulating (pelleting), coating and spheronizing, continuously optimize the production process, imporve production efficiency, and meet GMP requirements.
The coater integrates rotary fluidized bed technology with tangential spray technology, enabling efficient granulating (pelleting), spheronizing (shaping), and coating processes for solid pharmaceuticals.
The PLC control system allows for precise parameter adjustments, optimizing granulating, coating, and spheronizing processes. This enhances production efficiency and ensures compliance with GMP standards.
The coater is made from high-quality austenitic stainless steel with polished surfaces and arc transitions at corners. This design minimizes dead corners and residue, facilitating easy maintenance and a durable, clean appearance.
| LB320 | ||
| Raw materials charging quantity（Kg/ time）Density 0.5Kg/L | 0.2-0.5 | |
| Pelleting output quantity（Kg/ time）Density 0.7 Kg/L | 1-3.5 | |
| Spheronizing output quantity（Kg/ time）Density 0.7 Kg/L | 0.2-1 | |
| Pellet diameter（mm） | 0.25-2.5 | |
| Pelleting magnification times（K=D/d） | ≤2.7 | |
| Pelleting time（min/time） | 30-90 | |
| Spheronizing time（min/ time） | 3-8 | |
| Pelleting turntable max. Speed (variable frequency control) (rpm) | 600 | |
| Spheronizing turntable max. Speed (variable frequency control) (rpm) | 1350 | |
| Turntable motor power （Kw） | 1.1 | |
| Air supply fan | Power（Kw） | 0.55 |
| Air volume（m³/h） | 100 | |
| Air pressure（kpa） | 12 | |
| Dust removal fan | Power（Kw） | 0.4 |
| Air volume（m³/h） | 83 | |
| Air pressure（kpa） | 13 | |
| Powder supply mode | Screw feeding | |
| Powder supply motor power（Kw） | 0.18 | |
| Powder supply rotary speed（rpm） | 173 | |
| Liquid supply motor power（Kw） | 0.09 | |
| Liquid supply rotary speed（rpm） | 86 | |
| Electric heating power (Kw) | 1.5 | |
| Inlet air temperature（°C） | Room temperature~100 | |
| Compressed air pressure（Mpa） | 0.4~0.6 | |
| Compressed air consumption（m³/min） | 0. 2 | |
| Spray gun quantity (Pair) | 1 | |
| Weight（Kg） | 500 | |
+86-577-67378828
canaan@chinacanaan.com
